This is our New Titan Series NP205 Heavy Duty Slip Yoke Eliminator Kit. Fully CNC Machined in house from 8620 Billet Steel, Heat Treated to 58-62 Rockwell, then hard turned to exact bearing tolerances. The weak links of the stock 32 spline output have been eliminated by reducing the oiling groove size and increasing the shaft diameter for the bearing and the yoke.
Included in this kit is:
1x 34 Spline Titan Series NP205 Heavy Duty Output Shaft
1x Output Bearing (Larger than Stock)
1x 6061-T6 Billet Bearing Retainer (Machined to Accept Larger Bearing)
1x Custom Laser Cut Bearing Retainer Gasket
1x Output Shaft Nut
1x Output Seal
5x 3/8 x 7/8 Socket Head Cap Screws
**Note: Machining to the Speedo Housing is required to accept the larger bearing**
**Note: This Output shaft has no Speedo Gear Provision for maximum material size!**
**Note: A New Yoke or Flange will be needed to fit the 1.75" 34 Spline Shaft.**
You may also like
Recently viewed
DISCLAIMER
THIS PRODUCT IS FOR OFF ROAD USE ONLY. THE PRODUCTS SUPPLIED IN THE DELIVERED KIT ARE MANUFACTURED AND ASSEMBLED SPECIFICALLY FOR THE PURCHASED CONVERSION TYPE. ALL MODIFICATIONS TO COMPONENTS THAT HAVE NOT BEEN APPROVED OR AUTHORIZED BY NORTHWEST FABWORKS INC (NWF) WILL VOID WARRANTY AND/OR RETURNS. NWF IS NOT RESPONSIBLE FOR DAMAGED COMPONENTS THAT ARE NOT INCLUDED IN THE PURCHASED PRODUCT. NWF IS NOT RESPONSIBLE FOR DAMAGED NWF PRODUCTS CAUSED BY THE FAILURE OF NON-NWF PARTS. NWF DOES NOT COVER DAMAGE CAUSED BY INCORRECT INSTALLATION AND/OR ASSEMBLY. NWF LIMITS LIABILITY TO PRODUCT REPLACEMENT AND IS NOT LIABLE FOR LABOR, STORAGE, LOST WAGES OR OTHER COSTS ASSOCIATED WITH DOWNTIME. NWF DOES NOT WARRANTY PRODUCTS THAT HAVE BEEN USED OUTSIDE OF THEIR INTENDED USE.INSTALLATION OF THE FOLLOWING PRODUCT MAY VOID AUTOMOTIVE MANUFACTURER WARRANTY.