This is our NP205 32 Spline Slip Yoke Eliminator Kit. The Oiling Groove has been reduced to increase the strength at the weakest point. Uses the Common 32 Spline 2" though bore yokes or flanges. No Machining Required Direct Bolt in Kit.
Included in this kit is:
1x 32 Spline NP205 Output Shaft
1x 6061-T6 Billet Bearing Retainer
1x Custom Laser Cut Bearing Retainer Gasket
1x Output Shaft Nut
1x Output Seal
5x 3/8 x 7/8 Socket Head Cap Screws
This Kit is Currently Out of Stock with no estimated time frame when the will be available again.