Our Advance Adapter 50-6501 will allow you to adapt a Ford T-19 transmission to the Jeep Dana 300 and Jeep NP231 transfer cases. The adapter housing is 3.250” in length and is manufactured from 356-T6 heat treated aluminum alloy. We also supply a mounting provision on the bottom of the housing to bolt-on our heavy duty transmission mount (716021) or (716008). The adapter kit includes an adapter housing, new T-19 main shaft with 27 splines, 27 spline input gear, snap rings, gasket, fastening hardware and adapter instructions.
The adapter assembly will fit the Jeep Dana 300. This transfer case was used in the 1980-’86 CJ-7 series. All 300s use a 23 spline female input shaft. Some of the adapters we manufacture include a new Dana 300 input with a different input spline. Therefore, if you obtain a Dana 300 from a salvage yard, please verify the input spline.