The Ford C4 adapter to the Borg-Warner 1350 transfer case are available in 3 lengths 6.812” 8.750", and 11.50". By selecting the correct length adapter you should be able to get close to your stock drive-train length. To do this take your overall stock drive-train Length (from the bellhousing to transfer case connection surface) and subtract the length of the C4 transmission (17") Adapter material is 356 T-6 heat treated aluminum alloy and the adapter has a provision for a transmission mount. Our adapter kit includes an adapter housing, new C4 output shaft, vent, fastening hardware, and adapter instructions.
This adapter assembly fits the Ford Borg-Warner 1350 series transfer case found in the Bronco II, Ranger & Explorer trucks. The transfer case has a 25 spline female input sleeve. This transfer case has been manufactured in both a manual shift and electric shift.
The kit is designed for exclusive use with the Ford C4 automatic transmission. The Ford C4 is a 3 speed transmission was used between 1963-’82. The transmission bellhousing is
Removable, the overall length measures 17.00”.