Product Categories

Transfer Cases & Adaptors

Axle Parts & Upgrades

Yokes & U-Joints

Brakes

Steering

Suspension

Transmission Parts

Used Parts
                                      
| PAGE 1 | | PAGE 2 | | PAGE 3 | | PAGE 4 |


Installation Manual For Your
Dual Transfer Case Adaptor Kit (Page 3)

Clocking for PASSENGER side drop.


______________________________________________________________________________


Thank you for purchasing a NorthWest Fabworks Dual Transfer Case Kit, the most versatile and adjustable dual transfer case kit available.

We have provided a basic alpha numeric system to allow ease setting the clocking position. Each clocking hole on the NP203 and Rear Transfer Case Adaptor plate has been etched with a number, and each clocking hole on the Center Index ring has been etched with a letter.

On the following page there are two charts provided A and B; A for clocking your rear transfer case UP from the stock orientation, and B for clocking DOWN from the stock orientation.

______________________________________________________________________________

Example:
1. To Clock your rear transfer case 3"UP, first choose Chart A for Up rotation.
2. Find the column listed Desired Rotation of Rear Transfer Case, and down the row + 3.0".
3. Once you have located the correct column, you can match the desired hole positions on the 203 and center ring, #1 and letter A. Then on the next column to the right for the center ring and rear transfer case plate, #3 and letter Z.

_______________________________________________________________________________

CHART A:
Clocking Passenger Side Drop Transfer Case UP At Front Output

Desired Rotation Of Rear Transfer Case Clocking Ring To Rear Transfer Case Hole Position Clocking Ring To NP203 Hole Positions
0.0" (stock )
1 - A
4 - Z
+ 0.5"
2 - B
4 - Z
+1.0"
2 - C
4 - Y
+2.0"
1 - A
3 - X
+2.5"
2 - B
3 - X
+3.0"
1 - A
4 - Y
+3.5"
2 - B
4 - Y
+4.0"
2 - C
4 - X
+5.0"
2 - A
3 - X
+6.0"
2 - A
4 - Y
+6.5"
2 - B
4 - X


CHART B:
Clocking Passenger Side Drop Transfer Case DOWN At Front Output



Desired Rotation Of Rear Transfer Case Clocking Ring To Rear Transfer Case Hole Position Clocking Ring To NP203 Hole Positions
0.0" (stock )
1 - A
4 - Z
- 0.5"
1 - B
3 - X
-1.0"
1 - A
3 - Y
-2.0"
1 - C
4 - Z
-2.5"
1 - B
4 - Z
-3.0"
1 - C
3 - Y
-3.5"
1 - B
3 - Y
-4.0"
1 - A
3 - Z
-5.0"
1 - C
4 - Z
-6.0"
1 - C
3 - Y
-6.5"
1 - B
3 - Z


______________________________________________________________________________

Continue on and your NP203 and NP205 together by clicking >| HERE |

______________________________________________________________________________


Clocking and Installing your NP205
| PAGE 1 | | PAGE 2 | | PAGE 3 | | PAGE 4 |


                                                                                                                 

NorthWest FabWorks

1-250-248-6024

info@northwestfab.com

All content � 2004 - 2005 by NorthWest FabWorks

Disclaimer