Product Categories

Transfer Cases & Adaptors

Axle Parts & Upgrades

Yokes & U-Joints

Brakes

Steering

Suspension

Transmission Parts

Used Parts
                                      
| PAGE 1 | | PAGE 2 | | PAGE 3 | | PAGE 4 |


Installation Manual For Your
Dual Transfer Case Adaptor Kit (Page 3)


Clocking for a DRIVER side drop


______________________________________________________________________________


Thank you for purchasing a NorthWest Fabworks Dual Transfer Case Kit, the most versatile and adjustable dual transfer case kit available.

We have provided a basic alpha numeric system to allow ease setting the clocking position. Each clocking hole on the NP203 and Rear Transfer Case Adaptor plate has been etched with a number, and each clocking hole on the Center Index ring has been etched with a letter.

On the following page there are two charts provided A and B; A for clocking your rear transfer case UP from the stock orientation, and B for clocking DOWN from the stock orientation.

______________________________________________________________________________

Example:
1. To Clock your rear transfer case 3"UP, first choose Chart A for Up rotation.
2. Find the column listed Desired Rotation of Rear Transfer Case, and down the row + 3.0".
3. Once you have located the correct column, you can match the desired hole positions on the 203 and center ring, #1 and letter A. Then on the next column to the right for the center ring and rear transfer case plate, #3 and letter Z.

_______________________________________________________________________________

CHART A:
Clocking DRIVER Side Drop Transfer Case UP At Front Output

Desired Rotation Of NP205 Clocking Ring To NP205 Hole Position Clocking Ring To NP203 Hole Positions
0.0" (stock )
1 - A
4 - Z
- 0.5"
1 - B
3 - X
- 1.0"
1 - A
3 - Y
- 2.0"
1 - C
4 - Z
- 2.5"
1 - B
4 - Z
- 3.0"
1 - C
3 - Y
- 3.5"
1 - B
3 - Y
- 4.0"
1 - A
3 - Z
- 5.0"
1 - C
4 - Z
- 6.0"
1 - C
3 - Y
- 6.5"
1 - B
3 - Z



CHART B:
Clocking DRIVER Side Drop Transfer Case DOWN At Front Output



Desired Rotation Of NP205 Clocking Ring To NP205 Case Hole Position Clocking Ring To NP203 Hole Positions
0.0" (stock )
1 - A
4 - Z
+ 0.5"
2 - B
4 - Z
+1.0"
2 - C
4 - Y
+2.0"
1 - A
3 - X
+2.5"
2 - B
3 - X
+3.0"
1 - A
4 - Y
+3.5"
2 - B
4 - Y
+4.0"
2 - C
4 - X
+5.0"
2 - A
3 - X
+6.0"
2 - A
4 - Y
+6.5"
2 - B
4 - X


______________________________________________________________________________


Clocking and Installing your NP205
| PAGE 1 | | PAGE 2 | | PAGE 3 | | PAGE 4 |


                                                                                                                 

NorthWest FabWorks

1-250-248-6024

info@northwestfab.com

All content � 2004 - 2005 by NorthWest FabWorks

Disclaimer