My Account  |  0 item(s)    View Cart

Jeep T18 to Jeep Dana 300 / NP 231 23 Spline Transfer Case Adapter

On sale $457.00
Retail Price:$526.02
Your Savings:$69.02(13%)
Part Number:AA-50-7502

Choose Options

Customer Location:
Advance Adapter
 
The Jeep T-18 adapter to the Jeep Dana 300 is 3.250” in length. Adapter material is a strong 356-T6 heat treated aluminum alloy and the adapter has a provision for a transmission mount. The adapter kit includes a adapter housing, new T-18 output shaft, gaskets, seal, fastening hardware and adapter instructions.
Note: This adapter kit can also be used with the Jeep NP231. The NP231 must have a 23 spline input shaft with a stickout measurement of 1.19”
 
 
Transfer Case
 
1980-86 Jeep Dana 300. All 300s use a 23 spline input. Some of the adapters we manufacture include a new Dana 300 input with a different input spline. Therefore, if you obtain a Dana 300 from a salvage yard, please verify the input spline.
 
The adapter assembly will fit the Jeep NP231 transfer case with a 23 spline input shaft. This input shaft protrudes from the face of the transfer case 1.19”. Introduced in 1988, the Jeep NP231 is a part-time transfer case became the standard for XJ and YJ models. It was also used in six cylinder ZJ models through 1995. Chain driven with a 2.72:1 low range, it’s reliable even with more than stock horsepower applied.
 
Transmission
 
This adapter kit is designed for exclusive use with the Jeep T18