This adapter plate assembly is used to adapt a GM Engine to the Jeep T-150 3 speed manual transmission. The adapter plate is .750” in length and is manufactured from 356-T6 heat treated aluminum alloy. Included in the adapter plate kit you will receive an adapter plate, new 4.686” bearing retainer, pilot bushing, gasket, seal, fastening hardware, and adapter instructions.
Note: With our adapter plates, we utilize a new front bearing retainer to obtain proper bell housing alignment. Chevy adapter plates we use a small index of 4.686”, (the larger index retainer, P/N 716051, can be substituted for the 5.125” bell housing).
The T-150 can be identified by a case length of 9.250”, a casting number of 2603983 on the case under the fill hole. The top shifter mounted to the case with 8 bolts. The input shaft on this transmission is a 1-1/16”, 10 spline. The T-150 was normally used with an AMC 304 V8 engine.