The 700R adapter to the Land Cruiser 16 spline transfer case is 6.75” in length. And the overall length of the transmission and adapter is 30.125”. The adapter material is 356 T6 heat treated aluminum alloy. The adapter kit includes an adapter housing, 16 spline spud shaft, new 700R4 output shaft, transfer case shifter bracket, sealed bearing, gaskets, fastening hardware, and adapter instructions.
Note: When using a GM auto, we recommend a new front transfer case flange yoke. This new front flange is 3.5” in diameter vs. the standard flange 4.250” to 4.500” will aid in front drive shaft clearance. Refer to p/n’s 716370, 716371, or 716369.
This adapter assembly fits 1974 to July 1980 16 spline transfer cases. The drive gear has 16 internal splines and a diameter of 1.259”. The transfer case bolt pattern is the same as the earlier 3 speed transfer cases. Additional information can be obtained in our Land Cruiser Conversion Manual, TLC001.
Note: The late model 4L60E automatics will require VSS kit. We manufacture two styles of VSS kit's, 716073 fit model years 1993-96 and 50-0405 fit model years 1997 to current.