Note: This engine mount kit can be used with All GM V8’s & 4.3 V6 with a triangular / 3-bolt boss on the engine block. If using a new Gen III / IV , LS-Series V8, please use this engine mounting accessory P/N 713088
Advance Adapters Engine Mount Kit (P/N713001) for Chevy V8 & V6 engines.
These sturdy weld-in engine mounts allow the installer to fine-tune the engine placement according to transmission placement or other needs. A double rubber cushion on each side provides vibration isolation at the ends of the two mounts. The rubber cushions are secured with a large 5/8” diameter bolt. The engine side mounts have holes in them so you can position the engine closer to one side of the frame.
Use this engine mount kit to install a GM V8 or 4.3L V6 into your Jeep on the above table. Note that some newer engines will require an additional mounting or another mounting kit.
The engine mount kit includes two engine side mounts, two weld-in gusseted frame mounts, and rubber mount kit. This mount system fits vehicles with frame widths up to 28" wide.