One of the best upgrades for your First Gen Dodge is to upgrade your steering to a quality NorthWest Fab Crossover Steering System. Stock steering designs in vehicles do not adjust well to geometry changes due to lifts and stress of larger tires. This results in your vehicle suffering from bump-steer, roll-steer and loss of steering movement when the suspension is articulating. Our Crossover Steering Kit eliminates all of these ill effects by changing your steering geometry from "push/pull" to a longer laterally moving Draglink that connects from your new Pitman Arm, to passenger side steering arm mounted to the knuckle.
*Note: This Steering System requires the Steering Box to be relocated from the 4wd position to the 2wd position, eliminating the weak factory Adapter*
*Note: In some instances a new steering shaft from Borgeson will need to be acquired to complete the conversion*
*Note: On the 0-2.5" Kits a Minimum 9-1/2" is required between the frame and the Top of the Axle Tube to a Maximum of 12".